Replacement Handles For Windows
Window handles are one of the most frequently used elements of your double glazed door handle-glazed windows. As time passes, they could become rusted or worn out.
To replace a upvc replacement window handles window handle, you will need to know the spindle length of your existing handle and also its fixings. This can be accomplished by examining the base of the handle that was previously used.
Handle
Over time, uPVC window handles and locks can become damaged due to wear and tear, accidental or deliberate damage. This could mean that the handle or lock becomes difficult to open or close, or it’s not locked at all. It could be tempting to replace your entire window unit if this happens, but it is not always required. In many instances the case, a new handle or lock is enough.
The most common type of uPVC window handle is the espagnolette. The handle is equipped with an external spindle that is protruding from the handle. It fits into a gearbox that operates the multipoint locking system within the window. We have a range of replacement handles and locks for all types of uPVC window to ensure that they function properly.
When replacing a uPVC window handle it is an ideal idea to use screws with cover caps to ensure the screws are secure and prevent them from rust. Alternatively, it’s possible to make use of a spacer or washer to create a more secure seal. A screw cap will stop water and debris getting into the handle, causing damage.
After you have removed the handle from the window, it’s recommended to clean the spindle and the threaded part of the bolt. This will ensure that the handle fits and functions properly. It will also prevent dirt from entering the multipoint lock.
It’s now time to put in the new uPVC handle. It is essential to adhere to the directions that came by the handle you have purchased, and also to look at the old one prior to starting to understand how to do it correctly. Most of the time, the process is very straightforward. If you do encounter any problems along the way that aren’t covered in this guide, it’s best to contact our team for additional advice.
It’s also important to note that if replacing the uPVC handle cockspur (also known as an Espag handle) you will need to examine the step height of the window to find the right size of handle. The step height is the distance between the base of the window and the place where the handles of the cockspur are.
Hinges
The hinges may not be aligned with the frame of your window if your windows start to open and shut with a visible gap. This is usually an easy fix that can be solved with a new set of replacement hinges for windows. We offer a range of options and customise the dimensions of the hinges to suit your needs.
Whether you have a standard upvc window handle replacement or timber window, we can provide an array of various types of window hinges. They are available in a variety of colors that match the frames of your existing windows and come with all fixings required for fitting. We can supply repair screws for double glazed windows with older hinges. This allows you to cut the thread back into the frame.
We offer a wide variety of hinge styles. These include traditional casement hinges, Window Handles that can be used with the tilt and turn handle or a normal handle, as well as fire escape egress hinges, made for larger side hung windows. These hinges are designed to fully open in an urgent situation and Window handles have an easy-cleaning position. We also stock hinges with restricted egress that are designed to limit the opening angle of the window to a maximum of 100mm which is ideal for homes with children.
A squeaky hinge could be an indication that the hinges must be replaced. It’s usually due to metal rubbing against metal. A small drop of lubricant might help, but should the noise continue to be heard, it is likely that the hinges will require replacement.
Plumb windows help avoid optional binding, which means that the operating sash of the window is in line with the frame, which ensures that it can be closed and opened properly. If a window is not plumb could begin to open and close without difficulty, or it could become warped over time causing problems for the seal as well as the appearance of the window.
When purchasing replacement upvc window hinges, be aware that they can be bought in either imperial or sizes in metric. In general, the size in metric is a bit more precise, however this is not really noticeable once they are fitted. The first corner holes on the track are standard but the other holes can vary based on the hardware used originally. We suggest that you take measurements of the spacing of holes on your existing frame before purchasing any hinges made of upvc to be sure that they are the right dimensions.
Crank
Normal wear and tear over time can cause damage to the window handle, lock or crank mechanism. This can affect the ease of opening and closing your windows as well as compromising their security. If you notice that your window Handles is hard to open or close, or you hear a click when you turn the handle, it may be an indication that you have to replace the crank mechanism. If you’re unable to lock your window or the multipoint lock is damaged it could be worth considering replacing this piece of hardware too.
A new window crank is able to be replaced with minimal effort, but it’s crucial to buy the right size replacement. You can determine whether the new one has the exact same height of step as the previous one by measuring the distance from the guide for the crank arm bushing to the notch on the track at the bottom of the frame. You can also measure the length of the spindle on your current handle to determine the size of a replacement.
The type of handle you choose for your window will determine the type of crank mechanism you need for your casement and awning windows. Espag handles are equipped with a mental spindle at the back which is connected to the frame of the window and controls the mechanism. Cockspur handles are fitted with pegs that are fixed in their position by three or four screws which are set into the sash and frame.
Once you’ve found the correct replacement, it’s easy to install. Remove any trim mounting screws from the casement cover and gently lift the cover off to reveal the innards of the window operator (Photo 1). Compare the new lever with the old one and take off any trim screws that have rusted. Then, attach the replacement to the window frame, replace any screws that are rusted or bent, then put the casement cover back over the mechanism.