How to Choose a Smart Lock For Double Glazed Door
It’s important to select the right lock that meets high standards of security when shopping for double glazed window locks door locks. This includes being SS312 diamond approved or at a minimum Kitemarked TS007 3-Star which stops locking snapping.
Make sure that your doors are pre-drilled with bore holes before choosing a smart lock. You may need to install a hinge bolt or another additional security measure if you do not.
The majority of uPVC doors have an euro cylinder lock that sits within the handle and connects to a multi-lock system within the frame of the door. The problem with many older or cheaper uPVC doors is that locking mechanisms for cylinders can be easily ‘snapped and’snapped’, rendering the multi-lock system ineffective and allowing burglars to gain entry to your home. Better quality uPVC doors should have euro cylinders that are resistant to snaps and more difficult to tamper.
Multipoint locks are a common choice for uPVC door because they offer more security than one cylinder. They typically have a longer appearance and are secured at multiple points along the door and frame to stop burglars from accessing the unlocked side of your door.
When you are choosing a multipoint lock for your uPVC door, ensure that it is approved to the highest security standards. The most secure locks are approved to SS312 Diamond or at least Kitemarked to TS007 3 Star. Both of these standards require tests to guard against lock snapping.
Maintaining your uPVC door locks lubricated by a product like WD40 will extend their life and prevent the locking mechanism from becoming stiff, or causing the handle to struggle when it is used. This could be an indication of a problem with the internal springs which will require fixing or if you are applying too much force when locking the doors.
If you are looking to replace lock upvc door your uPVC locks, it is recommended that you speak with a professional locksmith who specialises in uPVC lock replacement. They will be able to advise you on which lock is best for your door, and give you a price quote. They can also change handles and repair broken panels if necessary.
A professional uPVC locksmith typically charges between PS35-PS50 to replace your uPVC door locks. They will offer a service that is efficient swift and performed to a high standard. They will charge extra for rekeying the locks or board any windows that were damaged.
uPVC Euro Cylinder Locks
The multi-point locking system is located in the door frame and connected to the cylinder locks (also called door barrels). They are also found in internal glazed doors and conservatories. These locks provide a high level of security, but can be vulnerable to attack, such as bumping and snapping of the lock. It is therefore essential to double lock uPVC doors prior to going to sleep or lock for double glazed door leaving your home.
There are a myriad of different cylinder locks available on market, and it is important to decide which one best suits your needs before buying. For instance, you must consider the frequency you lock your uPVC door, and if you’d like a keyed-along system that allows all of your doors can be opened using the same key.
The most popular type of cylinder lock is the euro cylinder which is found in a lot of uPVC doors. These are usually made of brass and are available in different sizes to fit most doors. The biggest models are usually used for the front and back doors on larger homes.
It is essential to choose a euro cylinder that has been tested according to the kitemark standards – SS312 Diamond-approved or TS007 3-star. It offers protection against Picking Drilling Bumping and Snapping.
Cylinder locks are available in a range of sizes and some can be offset, meaning that they can only be locked from the inside when they have been turned to the closed position by turning the handle upwards. You must also think about the amount you would like to spend on a Upvc lock. Prices will vary based on the level of security you need and the features you want to have.
It is crucial to measure your door when replacing a cylinder to ensure the new cylinder is suitable for the door. To do this find the cylinder screw, which is usually a large headed screw located on the same side as the lower end cylinder, and then remove it. Next, locate the cylinder on the door and take a measurement from the edge of the lock face to the center of the screw hole, this is your measurement A. Measure from the edge of your door to the center including furniture. This is your measurement B. Make sure you compare A and B to be sure you have accurately measured.
Multipoint uPVC Locks
The most secure lock for your uPVC or composite door is a multipoint locking system, which are long strip locks which extend the length of the door and feature multiple hooks and bolts that lock when the handle is operated. These locks provide more security for your home and come in various styles to suit any door type or taste. uPVC Multipoint Locks are found on most composite/timber and new uPVC door types.
The multipoint lock replacement near me resists this attack unlike Euro Cylinder locks that are prone to “lock snapping”. The locking points of a multipoint lock are connected with a bar made from steel, which blocks the hooks from moving, without taking the key out.
The majority of new uPVC and composite doors will come with an anti-snap multipoint lock installed as standard, but if you’re concerned yours may not then it’s worth getting the lock checked by a local locksmith. You can determine the lock by opening the door and then looking at the metal strip that runs the length of the doors. The most common manufacturers are ERA, Avocet Fuhr, or Mila.
You’ll have to use a lever lever on the lock or turn the key a number of times to engage the locking points, this is known as winding up the lock. After all locking points are engaged then you can use the handle to open and close the doors and the key locks it. This throws out the deadbolt that is located in the central gearbox.
When replacing your uPVC or composite front door lock, it’s always best to purchase from an established company that specializes in doors and windows since the locks on these products play an important function in securing your home and your family. If the security and locks of your new doors don’t meet the required standards, buying a cheap multipoint lock could be a false economic decision. This will not only put your family in danger, but also affect the cost of insurance.
uPVC Rim Locks
There are several kinds of uPVC the rim locks. The basic rim lock is one that is a slam-close lock. When you close the door it deadlocks automatically. You can also buy one that you have to manually lock with the key before leaving the home. These locks are not capable of being opened and are among the safest options you can install on your door. These locks are suitable for wooden/timber doors for homes with a domestic feel as well as glass panelled doors for commercial buildings. You can also get these locks certified to the latest British standard BS3621 so that your insurance company can give you discounts on your insurance premium.
Multi-point locks are used on uPVC doors as well as composite doors. They are extremely secure and offer the highest level of security for your home. They have multiple locking points so that even if you try to force the handle open, it will not turn. These locks are designed to make it hard for burglars to break through the handles, so they can’t pull the latch from the outside.
You can also purchase these locks with a mortice-sashlock for extra protection from people breaking in through the window locks for upvc windows. These locks are ideal for doors leading into outbuildings or gardens as they are extra secure against thieves who break through windows to gain access.
If you have a uPVC or composite door and are concerned about the possibility of the snapping of the cylinder, we can fit you an anti-snap lock which will prevent this from happening. We install these on our own composite doors and are the only uPVC installers in Belvedere who offer this.
If you need your locks changed outside of hours, it is possible to do so as we have a van on the move that is able to visit your home. The locksmith cost for this is slightly higher than when we work during the day but it’s worth the extra cost for security and comfort of having your uPVC door locks changed out of hours.