Choosing the Right Window Handle For Your UPVC Window
The right window handle is vital for a properly installed upvc windows handles. You’ll require a style that is not only practical but also complements the aesthetics of your home.
Changing the uPVC window handle is very simple. You only need some time and the tools below.
Metal
Metal window handles can be an attractive piece of furniture as well as an essential piece of hardware to improve the security of your home. There are a variety of metal window handles that can be customized to different frames and materials. Certain designs are specifically designed for sash windows in order to in making opening and closing the windows smoother and less likely to jam. For those seeking a safer option, there are a number of metal locking mechanisms that are designed to stop the window from being opened beyond a certain level.
Espag handles are perhaps the most well-known kind of window handle that is used on UPVC windows. They have a mental spindle at the back that is attached to the frame of the window and drives the window mechanism. They are available on both upvc door handles replacement and aluminium windows.
Cockspur handles are another popular kind of window handle typically found on older UPVC windows. These handles can be more difficult than modern Espag handles since they use a traditional peg-locking mechanism.
Cam handles are available to give an elegant look. They have a sleek edge and are designed to fit with other types of uPVC windows. They work well on tilt and turn windows, where it is possible to open the window from the bottom, while allowing the top to be opened.
It is crucial to take a variety of aspects into consideration when selecting new metal window handles including the step height as well as the direction in which the handle rotates. The first refers to the distance between the handle’s underside nose and the base of the screw plate while the latter refers to the direction in which the handle will be able to turn. Certain handles can only rotate in only one direction, like clockwise. Others can only rotate in the opposite direction.
Plastic
There are a variety of different types of window handles made of plastic. All are designed to operate a window and secure it from intruders. They are available in a variety of styles and colours to match uPVC and aluminium windows. Some are constructed with a lock that is built-in. This provides added security that allows you to keep the windows open and safe from intrusion.
A variety of situations can lead to window handle problems. Sometimes they may simply not be able to be turned correctly. This could be due to dust penetrating the mechanism, causing dirt or a blockage. The most frequent issue is when the handle of the window begins to cling or walk in a tight manner. This indicates that the window handle needs attention.
When this happens, it’s crucial to call a specialist. They can help you solve the issue quickly and effectively. They can also offer advice on replacing a plastic window handle with new ones that will work better and more effectively.
The majority of manufacturers use the exact same fasteners, regardless of the type of handle you’re using. This means that it’s easy to replace your window handle and lock with an exact match.
It is important to know the size and style of your window before you begin looking for a replacement handle. This will help you find a handle that fits your windows perfectly and won’t cause any problems. Also, make sure to keep track of the length of the spindle that is the measurement of how far the handle’s extends beyond the base. This can be a vital aspect if you intend to use your new window handle with a restrictor installed.
Casement
Similar to awning windows, casement windows hinge on the top and bottom, but they open to the left or right, rather than opening vertically. They are easy to clean and offer a stunning view of your yard or garden, while also allowing fresh air in. They’re a popular choice for new construction and also be a great addition to the architectural appeal of older homes. As time passes, they may become difficult to open or shut because of worn-out hardware or stripped gears. In some cases windows, a professional might require replacing the entire crank mechanism.
Awning windows or casement windows are usually equipped with a crank mechanism and roto gear to allow the window to be shut and open. They also come with an locking mechanism that holds the sash firmly in place when closed. The lock on a window that is awning works with bezel locks to seal the window. Many people overtighten their window’s operating handle. This can cause the locking mechanism to work against one another, causing the window to not be able to open or close properly.
Over time, the window crank handle can also become stripped. This can happen when the window is closed and opened several times over an extended period of time. It could be a problem when the window was used as a prop when it was closed which caused the handle to be pushed against and damaging the crank shaft or gears.
Fortunately, replacing a casement or window crank handle with an awning is a straightforward DIY window repair that could save you money in the long time. You’ll first have to locate the trim mounting screw that is holding the casement cover (Photo 3). After removing the screws, you can take off the handle that was previously used and examine the crank mechanism. The gears may be reflubricated, but if already worn out, it’s the time to replace them.
Cockspur
Cockspur window handles can be found on older uPVC timber, aluminium and timber windows. They lock with a key, are easy to operate, and provide an effective shield against noise and cold from the outside. The handle opens outwards by pressing down on the lever and the cockspur nose closes over a wedge striker in the frame to seal the window upon closing. By replacing both the handle as well as the wedge of the cockspur, you will increase the efficiency of double glazed windows handles-glazed windows and security.
The replacement cockspur window handles are available in left and right hand models and operate by turning them 90 degrees. The handles come with a spur that presses against the PVC wedge of the window frame in order to secure the closing. The handles are easy to install and are available in a variety of finishes such as satin chrome, [Redirect-iFrame] white, and PVD gold.
It can be a challenge to measure the backset on a cockspur, especially if you are replacing a handle that was previously used. This handle has been designed to solve this problem and comes with three packers with different thicknesses that can be positioned on the side of the handle’s nose to create a variety of backset step heights, including 9mm, 13mm, 17mm and 21mm.
The Schlosser Technik Apto is a premium quality replacement cockspur handle that is suitable for a variety of applications ranging from 9mm to 21mm with flexible screw fixing centres. It is also easy to put in with key locking and is available in a variety of finishes.
This cockspur handle is suitable for tilt and turn windows, however, it is not suitable for a side opening casement window (these require the tilt and pivot separately). This handle can be used to replace damaged or old handles on uPVC or aluminium frames using rivets instead of screws. You will require the use of a rivet gun as well as rivets to fit this handle to your existing window frame.
Espagnolette
The mechanism for locking your uPVC window is the espagnolette lock, also known as a shootbolt. They are a common feature found in older homes and provide both aesthetics as well as security for your home. Espagnolette handle styles can be key-locking or non-key-locking. They are available in both cranked and inline designs. They can be straight or curving. The key-locking push button offers extra security since it prevents the handle from being pulled open from the outside via an extremely long screw driver stuck between the frames. This is a common way of committing burglary!
There’s a wide selection of espagnolette handles you can pick from at GB DIY Store. It is essential to determine the size of the spindle of your current espag handle before purchasing a replacement. Once you’ve measured the spindle length of your current handle, look through our collection of espag handles to find the perfect design for your windows.
We have a wide selection of white uPVC espagnolette handles with key locking and non-key locking options. They come in various colours and spindle lengths to ensure you can match the new handles to your existing window frame and decor. Our espagnolette handle range includes classic and [Redirect-302] modern designs and contemporary styles. Each replacement handle comes equipped with 5 different sizes of magnetic spindles that range between 15mm and55mm so that you can attach the handle to your windows without having to purchase a specific screw size!
A clever rosette at the back of the rose ensures that the spindle will only be inserted using the left-hand or right-hand lever. This helps prevent any mishaps. A spindle insert made of metal helps to hold the espagnolette handle in place and the handle is held firmly in place with an innovative ‘click-fit’ mechanism that engages when the hand is turned to reveal an audible ‘click’.