Ghost Immobiliser 2
Protects your vehicle from key cloning and prevents thieves from driving your vehicle with your original keys. Our latest immobiliser is connected to your vehicle’s CAN data network and a unique pin must be entered to start the engine.
ghost 2 immobiliser cost, unlike trackers, doesn’t emit radio frequency signals, and therefore cannot be identified by diagnostic tools. Also, it doesn’t have any LED indicators or buttons giving the impression of its presence in your vehicle or van.
Anti-key Cloning
The ghost immobiliser has been created to fight key cloning and hacking. The device connects to the CAN data network of your vehicle and creates a unique pin code sequence that is activated by pressing the buttons that are factory-installed on your dashboard and the steering wheel. This prevents thieves from being able to start your car. If the incorrect PIN code is entered, your car cannot be started and it will be impossible for them to drive away with your pride and joy.
Ghost immobilisers use an innovative technology that is extremely difficult for thieves to defeat. Unlike physical deterrents like wheel locks and steering locks which can be cut or taken the ghost immobiliser is an invisible electronic device that can’t be easily detected by regular thieves since it doesn’t emit radio signals and operates in a silent manner.
The next generation of immobilisers are equipped to shield your car from a myriad of threats including cloned keys, key-hacking and even relay attacks. It can also stop the thief from adding a key or replacing your ECU since it will not allow them to start the car without first entering the correct PIN code.
Contrary to other immobilisers, the ghost immobiliser 2 does not require any additional remote or key fobs for operation. It is deactivable by using an app on the driver’s smartphone. This is ideal for those occasions when you have to give your car to valet parking or maintenance without key fobs.
The autowatch ghost immobiliser fitting Ghost-II represents the latest version of the Ghost’s immobiliser. It is designed to make it as simple and ghost ii immobiliser easy to use, while still being as secure as possible. This is achieved by integrating the Ghost-II with the vehicle’s CAN data network. This means that there are no wires that are able to be hidden or easily found. It also comes with an integrated feature that allows you to disarm your Ghost-II by connecting to the vehicle’s Bluetooth which means you can go out and drive without any hassle.
OBD port hacking
OBD port hacking is the most recent method employed by professional car thieves. Thieves can gain access to your vehicle’s OBD by using the help of a laptop, mobile application, and cables that can be bought on the internet for less than PS50. Once they have access, they are able to do whatever they want including resetting your vehicle’s fault codes, tuning your vehicle, or stealing it in less than a minute.
It can prevent your car from being taken away by requiring a unique PIN number to be entered with your key fob before you can start the engine or drive away. It communicates with the vehicle’s ECU (Engine Control Unit), using the CAN Data Circuit. It is not detected by any RF scanning technology or Ghost Ii Immobiliser code grabbing. It even includes a Service/Valet mode that allows your vehicle to start without the need for a PIN.
To use an OBD hacking device, you’ll require an operating system that is capable of reading the OBD protocol, which can be bought for less than PS100 on eBay or Amazon. You’ll also require cables with OBD pins that are connected to the CAN bus. These can be purchased on Amazon or Ebay for around PS50. The cable has to be spliced into the wiring harness of your car, like the radio wiring harness.
Once the hacker has access to the OBD port on your vehicle, they will send diagnostics to the system at a high baud rate, which will crash the car’s CAN and prevent the system from functioning. This could cause your vehicle’s engine to stall or even shut down.
No additional key fobs or remotes required.
The car immobiliser is a fantastic piece of anti-theft technology that is utilized by millions of modern cars all over the world. An aftermarket immobiliser helps protect your vehicle by using engine ECU software that stops cars from starting when a false transponder is transmitted.
It is possible for a criminal in the event that they know the code that disables an immobiliser, to disable it. A thief could easily take the battery off of most key fobs by removing them. They can then use an easy tool to take out the internal circuit board from an immobiliser and replace it with blank. They will then be able start your car.
With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser connects to the vehicle’s engine ECU (Engine Control Unit) via a discrete quiet data circuit in CAN that is not detectable by diagnostic tools such as those employed by high-tech thieves. It also doesn’t use a traditional key-fob with LED indicators, so it’s not visible at a glance.
You may have to turn off Autowatch’s Ghost ii immobiliser (chessdatabase.science) 2 automatic protection at times, such as during valet parking or during a service. The ghost CAN immobiliser comes with a specific mode for this, referred to as “Service Mode which can be activated with a push of the button on your smartphone. The vehicle can still be operated however its maximum speed will be restricted to 36 mph for added security.
If you’d like to know more about the TASSA certified ghost immobiliser, please contact us today to arrange a demonstration at our workshop. A member of the team will provide a full breakdown of the system’s operation and provide you with your owner’s manuals, installation certificates, Ghost 2 emergency card and security guarantee.
Simple PIN code change process
Ghost is a new generation device that secures your vehicle without cutting wires or installing aftermarket key fobs. It connects directly to your vehicles CAN data network and a personalised PIN code is programmed in it by pressing buttons on your steering wheel & dash. The device does not emit RF signals, therefore it cannot be bypassed. This makes it unrecognisable by sophisticated scans using RF or code-grabbing technologies that modern thieves use.
The PIN code sequence can be changed whenever you want to lock out prior drivers, and it even has an override option in the event of a sequence that is not remembered. When installing the installer will show how to do this. The system includes a valet mode feature that can be used to temporarily disable pin input sequences so that the garage or mechanic can service the vehicle without having to know the code. This is a great option for customers who don’t want their pin number to be divulged, but would like to leave their vehicle with valet parking or service.
Contrary to Thatcham products which require additional key fobs to operate, Ghost is a discreet system that makes use of the buttons on your car to create an unique and interchangeable PIN code sequence. This sequence is entered via the smartphone application. No additional LED indicators are used, and your car is secured without risk of being disabled.
Tested for each vehicle
A ghost immobiliser, in contrast to key fobs which require pressing buttons, is discretely installed under the dash or on the steering wheel. You won’t even know it’s there. The device is connected to your vehicle’s CAN network and a PIN number can be programmed using buttons on your car. The system then prevents your engine from starting unless the code is entered prior to. This means that thieves cannot copy the keys to your vehicle or gain access to the OBD to hack into it.
Ghost is a great option for all vehicles including electric cars, vans, motorhomes and bicycles. Ghost is also extremely flexible and can be set to disable in a variety of situations. For instance, it could be programmed to go into Valet mode when the car is transported to a valet parking or a service provider. This allows you to drive your vehicle within a 30mph speed limit and the ghost immobiliser will turn on itself when your vehicle returns to your home.
The device can also be reset at any time to your personal PIN number. This is great if you lose the code or when the device ceases to function.
It’s also important to note that the device is inaccessible to those who aren’t familiar with it. This is because it runs through the buttons on your car’s dashboard and steering wheel and uses the data they transmit to recognise the buttons that have been pressed. This makes it a secure and secure security system that can’t be tampered by RF scanning, jamming, or a door lock pick set.