Replacement Double Glazing Window Handles

If a double-glazed window handle breaks, it is crucial to replace it that is safe and functional.

uPVC handles are operated by a spinning wheel that runs through the middle of the handle and into the lock mechanism in the window frame.

You will need to be aware of the step height for your uPVC handle. This can be found by looking for screw cap caps on the inside face of the handle.

Tilt & Turn

Tilt and turn windows are a popular option in Europe but they’ve only recently begun to make an impression here in the UK. The advanced functionality of these windows makes them a great option for new construction and renovation projects. They are easy to open and close, allowing light and ventilation into your home.

The locking points on the sash and the rubber seal that runs across the entire frame’s perimeter ensure that they are more airtight than other window types. Contrary to uPVC Casement Windows that tilt and turn are able to be opened from both the top and bottom. This allows you to clean your windows from the outside from the comfort of your home.

If you are replacing upvc window handles a tilt and turn window handle, it is important to consider the step height of the handle. This is the distance from the base of the handle to the point where it is attached to the window frame. It is essential to do this correctly because if it isn’t done, the window won’t be able to open correctly.

Standard step heights for UPVC and tilt-and turn windows made of aluminum are 21mm. Ensure that the new handle you choose has this same step height so that it fits in your window.

When choosing a replacement tilt and turn window handle you must consider the type of operation. Some handles feature an adjustable lever that can be turned down to lock, up at 90 degrees to tilt, and straight up to open. This is referred to as a “tilt-before-turn” (TBT), safe handle. You should make use of it when children are present in your home.

A spindle is usually found on the handle of most tilt and turn windows. The spindle is adjusted in different places, much like a door lock. The length of the spindle can also vary. Some have a longer spindle, and it is adjustable by using an screwdriver to move the shaft up or down. Some have a shorter spindle that is adjustable by loosing one screw at the base of the handle.


Casement windows are extremely popular for a variety of reasons. It is simple to install and provides great energy efficiency and noise reduction. However, there are a few typical issues with these windows that homeowners must be aware of. For instance, if the casement window handle breaks it could be difficult to open the window.

Fortunately, there are simple steps you can take to change the handle on your window and get it back to working. If your casement window is new or Double glazing Window handles old, you can follow these steps to ensure that your home is safe and secure.

It is essential to fix your uPVC window as soon as you can. This will help to ensure your home’s security and discourage burglars. There are several options to replace your window handle, including espag handles and cockspur handles. It is essential to choose the appropriate handle for your window. If you’re having trouble opening your windows, it could be because the spindle in the handle has worn out.

When replacing your uPVC casement window handles, there are some things to consider. These include the handle size, the screw centres, and the spindle’s size. Take into consideration the type of lock you want and the color. This is because the locking mechanism of your window will be dependent on the kind of handle you choose.

Espag handles are found on uPVC window frames in the present. These handles are used to operate your uPVC window’s multipoint espagnolette lock. They are available in a range of colors and are available in locking or non-locking versions. They also come in left and right opening styles.

Cockspur handles can still be found on older uPVC double-glazed windows, but these handles are no longer in use. These handles differ from the aluminum equivalents in that they come with different heights for the steps. The aluminum version has 9mm of step height, while the typical 21mm handle is used.

You can also use blades or spade handles as replacement handles for double-glazed windows. These handles are similar in design to cockspur handles, but they have a smaller spindle. They are often used on older wooden frame double glazed windows, but they could also be found on uPVC cottage windows.


If you have an old sash window you may have to replace the handles. This is because these windows are equipped with a system that includes the counterweights, sash cords, rails and pulleys. These components permit the sash window to be moved up and down with ease. The sash’s movement helps prevent moisture from getting into the frame and result in wood rot or mould, as well as allowing you to open the window to let in fresh air.

You’ll have to determine the spindle of your sash windows in order to find the right handle. You can find this by measuring the distance between the handle base and the frame. You’ll also have to consider whether the window is positioned, i.e. whether the handle opens clockwise (right-handed) or clockwise (left-handed).

Once you’ve picked the best sash handles to fit your window handle repair, you’ll need to determine if you’ll need tilt latch. A tilt latch is used to ensure that the window is up and is able to be fitted on single or double glazed window handles-glazed windows. There are three types of tilt latches: internal, slide-in and surface mounted.

For additional security, have a sash lock fitted to the window sash. This will prevent intruders from forcing your window open.

There are many different styles of sash handles to pick from. Espag handles are among the most well-known for uPVC Windows. These are usually slim and round with a locking mechanism, however, there are also cockspur handle and monkey tail handle designs. These are better suited to heritage windows, and have more of a decorative appearance. However, they can also be found on casement windows.

Vertical Sliding

Vertical sliding windows are a great choice for smaller rooms. While horizontal sliding windows are favored for large openings, they are also suitable for larger openings. These windows are easy-to-clean and provide great ventilation. They are also more affordable because they don’t require any maintenance. They are susceptible to damage in the event that you accidentally move the windows. This is why it’s important to install these windows in a place that is out of reach of pets and children.

Vertical sliding windows by dragging the frame left or right. The spiral balance is usually composed of a steel strip protruding out from the window on one side, and bent into a coiled form. When the window is lowered, the hidden end of the spiral turns and allows the sash to be raised and closed.

Vertical sliding windows are typically made of real wood, which adds a classic look to your home. However, if you prefer an elegant style, there are a lot of PVC-U alternatives that come in a variety of finishes and colours to suit your style. Some manufacturers even offer a woodgrain effect for an authentic look.

Contrary to double-hung windows, which can be difficult to open in certain conditions, vertical sliding windows are more suited to people with mobility issues. They are also less susceptible to damage from moisture than their wooden counterparts making them an excellent option for homes with young children or seniors.

Certain homeowners install security features on their new sliding windows to keep intruders away from their home. To accomplish this, you can insert an unfinished piece of wood into the lower sash. You can then tack it onto the frame to keep it from being opened fully. Consider adding a sliding bolt keyed lock to the frame if you want a more sophisticated option. This will give your family peace of mind knowing that their windows are safe and accessible in an emergency.

Leave a Reply

Your email address will not be published. Required fields are marked *